Wochel UYT0897 Gooseneck Clamp Mount for HelloBaby Cameras Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Wochel UYT0897 is a clamp mount with a bendable gooseneck arm for HelloBaby-style baby cameras. The listing names HelloBaby HB6550, HB6560, HB6550 Plus, HB6148, HB6339, HB6351, HB65 and HB40, GoodBaby SM663, Blemil BL9064 and BL9052 and ANMEATE SM935E, plus any camera with a standard 1/4-inch thread. The title gives a 15.75-inch arm. It clips onto crib rails, shelves, chair backs and flat panels, with a foam pad under the clip to protect furniture, so there are no screws or holes. Wochel says the arm and clip are aluminium alloy and the mount folds for travel. No camera is included. We compiled this from the Wochel listing; it has not been through our hands.
What stands out
- Fits HelloBaby, GoodBaby, Blemil
- 1/4-inch thread
- 15.75-inch gooseneck (title)
- Foam-padded clip
- No drilling
- Folds for travel
Who it fits
Good fit for
HelloBaby or GoodBaby owners who want the camera above the crib without touching the walls, at home or away.
Who should skip it
Anyone with no rail or shelf near the crib to clamp onto; a floor stand covers that case.
Verdict: A cheap, portable clamp for the many 1/4-inch closed-monitor cameras.
Wochel UYT0897 specs
Fit
HelloBaby HB6550 family, GoodBaby SM663, Blemil BL9064/BL9052, ANMEATE SM935E.
Thread
Standard 1/4-inch.
Arm
15.75-inch gooseneck (title figure).
Material
Aluminium alloy, per Wochel.
Base
Clip with a foam pad.
A clip, an arm and a screw
The UYT0897 is about as simple as camera mounts get: a reinforced clip at the bottom, a bendable gooseneck and a 1/4-inch screw on top. The foam under the clip stops scratches on a painted crib or shelf. It folds down small enough to pack with a travel monitor.
Clamping the UYT0897 in place
Clip it to the crib rail or a nearby shelf edge, screw the camera on and bend the arm until the camera looks down at the mattress. Keep the arm and cable outside the crib where small hands cannot reach. Choose the Wochel UYT0897 for a HelloBaby or GoodBaby camera and something to clip to; choose the Derebir DE-H06-09 floor stand for an ARENTI camera or a room with no rail nearby.
Before buying the Wochel UYT0897
Check three things.
Check before you buy
- Your camera is on the Wochel UYT0897 list or has a 1/4-inch thread
- A rail, shelf or panel near the crib for the Wochel clip
- Camera sold separately from the UYT0897
The product at a glance
Wochel White Flexible Baby Monitor Mount
Best for: HelloBaby owners
- Use
- Baby
- Color
- White
View on Amazon: Wochel White Flexible Baby Monitor Mount Affiliate link
Aluminium gooseneck clamp mount (15.75-inch arm per title) for HelloBaby HB6550-family, GoodBaby SM663, Blemil and other 1/4-inch baby cameras; foam-padded clip, no drilling, foldable.
Pros
- Wide 1/4-inch compatibility
- No tools or holes
- Folds for travel
Cons
- Needs a rail or shelf to clip to
- Arm length only in title
- Camera not included
Good fit if
- Your HelloBaby or GoodBaby camera needs a crib-side perch
Skip if
- There is nothing near the crib to clamp onto
Verdict: Clamp gooseneck
Specifications side by side
| Spec | Wochel White Flexible Baby Monitor Mount |
|---|---|
| Use | Baby |
| Color | White |
| Model | UYT0897 |
Frequently asked questions
Which cameras fit the Wochel UYT0897?
HelloBaby HB6550, HB6560, HB6550 Plus, HB6148, HB6339, HB6351, HB65 and HB40, GoodBaby SM663, Blemil BL9064/BL9052, ANMEATE SM935E and other 1/4-inch cameras.
Does the Wochel UYT0897 need screws?
No. It clamps on and comes off without tools.
How long is the Wochel gooseneck?
The title gives 15.75 inches.
Will the UYT0897 clip mark my crib?
The clip has a foam pad underneath to protect surfaces.
Is the Wochel UYT0897 good for travel?
Wochel describes it as foldable and portable.
