Wochel Wall Mount for iFamily SM650 Baby Cameras Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Wochel bracket is a small wall mount for iFamily baby cameras, listed for the SM650, SM653 and SM43E and for other cameras with a 1/4-inch thread. Its useful twist is the choice of fixing: adhesive tape for renters, or the included screws for a firmer hold. The head turns 360 degrees, and Wochel's point is height: mounted up the wall, the camera sits out of the baby's reach. It weighs 3.2 ounces and comes in white. The listing gives no load limit or dimensions. This review relies on Wochel's listing rather than our own testing.
What stands out
- Fits iFamily SM650, SM653, SM43E
- Tape or screw mounting
- 360-degree head
- 1/4-inch thread
- 3.2 oz, white
Who it fits
Good fit for
iFamily owners who want the camera high on the wall, including renters who would rather use tape.
Who should skip it
Parents who move the camera between rooms often; a clamp or floor stand is easier to shift.
Verdict: A light wall bracket for iFamily cameras with a no-drill option.
Wochel iFamily mount specs
Fit
iFamily SM650, SM653, SM43E; other 1/4-inch cameras.
Fixing
Adhesive tape or screws, both included.
Head
360-degree adjustment.
Weight
3.2 oz.
Load limit
Not listed.
A wall bracket with two ways up
The bracket is a short arm on a wall plate with a 1/4-inch screw and a rotating head. Wochel supplies both tape and screws. Tape keeps walls intact; screws are the safer choice above a crib, because a camera dropping from height is exactly what a wall mount is meant to prevent.
Putting the Wochel mount up
Pick a spot above and to the side of the crib, fix the plate, screw on the iFamily camera and turn the head until the mattress is in frame. Route the cable down the wall away from the crib. Choose this Wochel mount for a fixed wall position; choose the Aobelieve AE-0301 clamp if you want an iFamily SM650 on a crib rail or shelf without touching the wall.
Before buying the Wochel iFamily mount
Quick checks.
Check before you buy
- Your camera is an iFamily SM650, SM653 or SM43E, or has a 1/4-inch thread
- Decide on tape or screws for the Wochel plate
- A cable route away from the crib
- Camera not included with the Wochel bracket
The product at a glance
Wochel Adhesive Baby Monitor Mount
Best for: Renters with iFamily cameras
- Use
- Baby
- Color
- White
- Weight
- 3.2 ounces
View on Amazon: Wochel Adhesive Baby Monitor Mount Affiliate link
White wall bracket for iFamily SM650, SM653 and SM43E (and 1/4-inch cameras) with a 360-degree head; mounts with included tape or screws, 3.2 oz.
Pros
- Tape or screw fixing
- 360-degree head
- Light and small
Cons
- No load limit listed
- Fixed position
- Camera sold separately
Good fit if
- You own an iFamily camera and want it high on the wall
Skip if
- You move the camera between rooms
Verdict: iFamily wall mount
Specifications side by side
| Spec | Wochel Adhesive Baby Monitor Mount |
|---|---|
| Use | Baby |
| Color | White |
| Weight | 3.2 ounces |
Frequently asked questions
Which iFamily cameras fit this Wochel mount?
The SM650, SM653 and SM43E, plus other cameras with a 1/4-inch thread.
Can I put the Wochel bracket up without drilling?
Yes. It can be fixed with the included adhesive tape or with screws.
Does the Wochel mount rotate?
Wochel lists 360-degree angle adjustment.
How heavy is the Wochel iFamily mount?
The listing gives 3.2 ounces.
Is tape strong enough for the Wochel bracket above a crib?
The listing gives no load figure; screws are the safer choice directly over a crib.
