Derebir WH11 Baby Monitor Wall Mount for Babysense Cameras Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Derebir WH11 is a wall mount for Babysense baby cameras: it screws to the wall above or beside the crib and holds the camera on a 360-degree universal joint, so you can aim it down at the mattress. Derebir lists the Babysense Max View +1 and +2, HD S2, V43, V24R, PRISMA and VBM55TX, and also mentions other cameras with a 1/4-inch threaded hole. Screws and positioning stickers come in the box; the camera does not. The size field reads 2.74 inches without saying what is measured, so treat it as a rough guide only. Everything here is drawn from the Derebir listing rather than our own testing.
What stands out
- Shaped for Babysense cameras
- 360-degree universal joint
- Screws and position stickers included
- 1/4-inch thread also listed
- White finish
Who it fits
Good fit for
Babysense owners who are happy to drill and want the camera fixed high on the wall, out of reach of the crib.
Who should skip it
Renters or anyone who cannot drill; a floor stand or a twist mount suits them better.
Verdict: A tidy screw-in perch for a Babysense camera; check your model against Derebir's list first.
Derebir WH11 at a glance
Babysense fit
Max View +1/+2, HD S2, V43, V24R, PRISMA, VBM55TX.
Other cameras
Listed for 1/4-inch threaded bases.
Joint
360-degree rotatable universal joint.
Mounting
Screws to the wall; screws and stickers in the box.
Size field
2.74 in, item not specified.
A short wall arm with a ball joint
The WH11 is a compact bracket rather than a pole: a wall plate, a short arm and a universal joint that turns a full circle. Derebir says the holder locks the Babysense camera firmly, which matters because Babysense add-on cameras use their own base shape. The finish is white, so it blends with most nursery walls.
Fitting the WH11 above a crib
Mark the spot with the supplied stickers, screw the plate in, then set the camera on the holder and turn the joint until the mattress fills the picture. Keep the camera cable out of the baby's reach, which a wall position makes easier. Choose the Derebir WH11 if you own a Babysense set and can drill; choose the Derebir DE-H06-09 floor stand if you own an ARENTI camera and want nothing on the wall.
Before ordering the Derebir WH11
A few checks save a return.
Check before you buy
- Your Babysense model is on the Derebir WH11 list
- You can drill into the nursery wall
- A camera cable long enough to reach the WH11 position
- No Babysense camera ships with the WH11
The product at a glance
Derebir White Baby Monitor Mount for Babysense
Best for: Babysense owners
- Resolution
- 720p
- Use
- Baby
- Color
- White
View on Amazon: Derebir White Baby Monitor Mount for Babysense Affiliate link
White wall mount for Babysense cameras (Max View, HD S2, V43, V24R, PRISMA, VBM55TX) with a 360-degree universal joint; screws and stickers included, camera not included.
Pros
- Fits several Babysense models
- 360-degree joint
- Mounting hardware in the box
Cons
- Needs drilling
- Size figure unexplained
- Holder shaped for Babysense
Good fit if
- You own a Babysense camera and can drill the wall
Skip if
- You rent or cannot drill
Verdict: Babysense wall mount
Specifications side by side
| Spec | Derebir White Baby Monitor Mount for Babysense |
|---|---|
| Resolution | 720p |
| Use | Baby |
| Color | White |
| Size | WH11-2.74"WH11-for Babysense Cameras |
| Model | WH11-for Babysense Camera |
Frequently asked questions
Which Babysense cameras fit the Derebir WH11?
Derebir lists the Max View +1 and +2, HD S2, V43, V24R, PRISMA and VBM55TX.
Does the Derebir WH11 need drilling?
Yes. It fixes to the wall with the screws in the box.
Can the WH11 hold a non-Babysense camera?
The listing says cameras with a 1/4-inch threaded hole also fit, but the holder is shaped for Babysense.
How far does the WH11 joint turn?
Derebir describes a 360-degree rotatable universal joint.
Is a camera included with the Derebir WH11?
No, the camera is sold separately.
