As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Sensor Spacer and Adhesive Tape Bundle for ADT Contact Sensors Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This bundle is an installation accessory for ADT door and window contact sensors, sold by a third-party brand (Security Sensor Spacers), not by ADT. It contains 12 spacers, four each at 1 inch, 1/2 inch and 1/4 inch thick, plus 24 adhesive pads cut from 3M PE foam. Spacers raise a sensor or its magnet so the two line up when a door or window frame sits at different depths; no sensors or magnets are included. The listing names ADT Blue contact sensors and ADT door and window sensors. We read the listing; we have not fitted the parts.

What stands out

  • 12 risers in three thicknesses
  • 24 pre-cut 3M foam adhesive pads
  • Made to fit ADT contact sensors
  • Tool-free peel-and-stick

Who it fits

Good fit for

ADT owners whose contact sensors sit misaligned with their magnets on recessed frames, sliding doors or trimmed windows, and anyone re-sticking sensors that have come loose.

Who should skip it

Owners of other sensor brands, unless they have checked the footprint, and anyone expecting new sensors in the box.

Verdict: A useful fix-it kit for ADT contact sensors that do not line up; it adds nothing if yours already fit.

What is in the kit

4 x 1-inch spacers

For deep frames where the magnet sits far back from the sensor.

4 x 1/2-inch spacers

For standard gaps.

4 x 1/4-inch spacers

Fine adjustment where clearance is tight.

24 adhesive pads, 3M PE foam

Pre-cut; the listing says they remove without residue.

Not included

Contact sensors and magnets.

Design

The spacers are blank risers sized for ADT contact sensors. The listing does not give their length and width, so if you plan to use them with another brand's sensors, compare footprints from the photos first.

Fitting them

Hold the sensor and magnet in place with the door shut to see which side needs raising and by how much, then stack the right spacer under the shorter part. Clean the surface, peel the 3M pad and press firmly. Test with the alarm panel in chime or test mode before relying on it.

Check before ordering

Measure the gap between sensor and magnet faces before you buy.

Check before you buy

  • Your sensors are ADT contact sensors
  • How much rise each ADT sensor or magnet needs
  • Enough pads for the sensors you are re-sticking
  • That your sensors and magnets are already on hand

The product at a glance

Security Sensor Spacers ADT Bundle

Best for: ADT sensor installs

View on Amazon: Security Sensor Spacers ADT Bundle Affiliate link

Third-party kit of 12 risers (1, 1/2 and 1/4 inch) and 24 3M PE foam pads for aligning and re-mounting ADT door and window contact sensors. No sensors included.

Pros

  • Three riser thicknesses
  • 24 adhesive pads
  • No tools needed

Cons

  • Sensors not included
  • Footprint size not listed

Good fit if

  • Your ADT contacts are misaligned or loose

Skip if

  • You have no ADT contact sensors

Verdict: A practical fix for awkward ADT sensor mounts.

Specifications side by side

Frequently asked questions

Does this ADT spacer bundle include sensors?

No. It contains only 12 spacers and 24 adhesive pads; contact devices and magnets are not included.

What thicknesses are the ADT sensor spacers?

Four each of 1 inch, 1/2 inch and 1/4 inch.

Is this spacer bundle made by ADT?

No. It is a third-party kit sold for ADT contact sensors.

What adhesive comes with the ADT sensor spacers?

24 pre-cut pads of 3M PE foam adhesive.

See also