KHQBG Flexible Clamp Mount for Tapo C200, C210 and C220 Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The KHQBG clamp is a flexible mount for TP-Link Tapo C200, C210 and C220 pan-tilt cameras, made for parents who use a Tapo camera as a baby monitor. It clips onto a crib, shelf or bracket, and the arm bends so the camera looks down over the bassinet. That is all the listing says: there is no arm length, material, weight or load figure, so judge the size from the photos. No camera is included. We based this on KHQBG's short listing and have not used the mount.
What stands out
- Fits Tapo C200, C210, C220
- Clamps to crib or shelf
- Bendable arm
- No drilling
Who it fits
Good fit for
Tapo C200, C210 or C220 owners who want the camera above the crib rather than on a dresser.
Who should skip it
Owners of other cameras, or anyone who wants published dimensions and materials before buying.
Verdict: A cheap Tapo-specific clamp with very little published detail.
KHQBG clamp specs
Fit
TP-Link Tapo C200, C210, C220.
Fixing
Clamp to crib, shelf or bracket.
Arm
Flexible; length not listed.
Material
Not listed.
Camera
Not included.
Clamp, arm and Tapo holder
The KHQBG mount pairs a clamp base with a flexible arm and a holder for the round-base Tapo pan-tilt cameras. Since the Tapo C200 family already pans and tilts, the arm mainly needs to lift the camera above the crib rail; the camera's own motor does the fine aiming.
Setting up a Tapo over the crib
Clamp the KHQBG to a shelf or the outside of the crib frame, fit the Tapo camera and bend the arm until the bassinet is in view, then fine-tune with pan and tilt in the Tapo app. Keep the cable outside the crib. Choose the KHQBG for a Tapo C200, C210 or C220; choose the Wochel UYT0897 clamp for a camera with a 1/4-inch thread such as HelloBaby or GoodBaby.
Before buying the KHQBG clamp
Short checklist.
Check before you buy
- Your camera is a Tapo C200, C210 or C220
- A shelf or crib frame for the KHQBG clamp
- Arm length and material are not stated for the KHQBG
The product at a glance
KHQBG Flexible Clamp Mount for Tapo Cameras
Best for: Tapo owners
- Use
- Baby
View on Amazon: KHQBG Flexible Clamp Mount for Tapo Cameras Affiliate link
Flexible clamp mount for TP-Link Tapo C200, C210 and C220 cameras; clips to cribs, shelves or brackets, no drilling; arm length and material not listed.
Pros
- Made for Tapo pan-tilt cameras
- No tools
- Low cost
Cons
- Almost no specs published
- Tapo C200/C210/C220 only
- Camera not included
Good fit if
- You use a Tapo C200, C210 or C220 as a baby camera
Skip if
- You want a mount with published dimensions
Verdict: Tapo crib clamp
Specifications side by side
| Spec | KHQBG Flexible Clamp Mount for Tapo Cameras |
|---|---|
| Use | Baby |
| Model | clamp |
Frequently asked questions
Which cameras fit the KHQBG clamp?
TP-Link Tapo C200, C210 and C220.
Does the KHQBG mount need drilling?
No. It clamps onto cribs, shelves or brackets.
How long is the KHQBG arm?
The listing does not give a length.
Is a Tapo camera included with the KHQBG?
No, only the mount.
Can I still pan and tilt the Tapo on the KHQBG mount?
Yes. The mount holds the camera; panning and tilting still work from the Tapo app.
See also
- eufy e21 4k add on camera t8354 review
- eufy e20 e21 baby monitor charging base review
- eufy e20 2k add on camera t8352 review
- best security cameras under 30
- best security cameras under 50
- 12 Best Security Cameras Under $100, Compared
- Best Security Cameras Under $150 in 2026: 12 Picks Ranked by Specs
- Best Security Cameras Under $200: 13 Spec-Based Picks
- mount it triple monitor electric standing review
- vivo triple monitor mount fully review
