JAMYOK 16-Inch Pan-Tilt Clamp Mount for Baby Cameras Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The JAMYOK DE-H05-01 is a clamp-on gooseneck mount for baby monitor cameras, and its difference from most clamps is a pan-tilt head on top of the 16-inch arm, so you can turn the camera without re-bending the gooseneck. JAMYOK lists a long fit list: HelloBaby HB6550, HB6550 Pro, HB65, HB66, HB248, HB40, HB6339, HB6351, HB6336, HB6560, HB6081 and HB6558, ANMEATE SM935E and SM650, nooie IPC100, Momcozy BM01/BM03/BM04, Blemil BL9064-2 and BL9052, plus cameras with a standard 1/4-inch thread. The clamp opens from 0 to 2 inches and is lined with a non-slip pad and rubber band. No load limit is given. No camera comes with it. This summary draws on JAMYOK's product listing; we have not mounted it.
What stands out
- 16-inch gooseneck arm
- 360-degree pan-tilt head
- Clamp 0-2 inches
- Aluminium-magnesium alloy
- Long named fit list
- No tools, folds for travel
Who it fits
Good fit for
HelloBaby, Momcozy, Blemil or ANMEATE owners who want fine angle control above the crib.
Who should skip it
Buyers who need a stated weight limit, or a camera with no 1/4-inch thread and no listed fit.
Verdict: The pan-tilt head is the reason to pick it over a plain gooseneck clamp.
JAMYOK DE-H05-01 details
Arm
16-inch gooseneck plus a 360-degree pan-tilt head.
Clamp
Opens 0-2 inches, non-slip pad and rubber cover.
Material
Aluminium-magnesium alloy.
Weight
8.82 ounces.
Fit
HelloBaby, Momcozy BM01/03/04, Blemil, ANMEATE SM935E/SM650, nooie IPC100, 1/4-inch cameras.
Load
Not listed.
Gooseneck plus pan-tilt head
The alloy arm is built for repeated bending, and the extra head on top handles the last bit of aim. The padded, rubber-covered jaws are meant to protect crib rails and furniture. The silver finish and 8.82-ounce weight make it easy to fold into a travel bag.
Setting up the JAMYOK mount
Clamp it to a crib rail, shelf, stroller handle or headboard up to 2 inches thick, bend the arm over the crib, then fine-tune the view with the pan-tilt head. Keep the arm and cable out of the baby's reach. Choose the JAMYOK for the extra head and its 2-inch clamp; choose the GAHOGA clip mount if you want a stated 2.2 lb load rating.
Before buying the JAMYOK mount
Confirm your camera first.
Check before you buy
- Your camera model is on JAMYOK's list or has a 1/4-inch hole
- Rail or edge no thicker than 2 inches for the JAMYOK clamp
- No weight limit is published for the JAMYOK arm
- The JAMYOK box holds the mount only, no camera
The product at a glance
JAMYOK Baby Monitor Mount Holder 16" Arm
Best for: Crib-rail mounting
- Use
- Baby
- Color
- Silver
- Weight
- 8.82 ounces
View on Amazon: JAMYOK Baby Monitor Mount Holder 16" Arm Affiliate link
16-inch alloy gooseneck clamp with a 360-degree pan-tilt head and a 0-2 inch padded clamp; fits HelloBaby, Momcozy, Blemil, ANMEATE SM935E and 1/4-inch baby cameras.
Pros
- Pan-tilt head for fine aim
- Clamp opens to 2 inches
- Long compatibility list
Cons
- No load limit stated
- Camera not included
- Must clamp to an edge
Good fit if
- You want to aim a HelloBaby or Momcozy camera without re-bending the arm
Skip if
- You need a published load rating
Verdict: Fine angle control
Specifications side by side
| Spec | JAMYOK Baby Monitor Mount Holder 16" Arm |
|---|---|
| Use | Baby |
| Color | Silver |
| Weight | 8.82 ounces |
| Size | 16" for hellobaby |
| Model | DE-H05-01 |
Frequently asked questions
Which baby cameras fit the JAMYOK DE-H05-01?
HelloBaby HB6550 family and others, Momcozy BM01/BM03/BM04, Blemil BL9064-2/BL9052, ANMEATE SM935E/SM650, nooie IPC100 and cameras with a 1/4-inch thread.
How long is the JAMYOK gooseneck?
16 inches, with a pan-tilt head on top.
How thick a rail does the JAMYOK clamp grip?
From 0 up to 2 inches.
Does the JAMYOK mount need drilling?
No. It clamps on by hand and folds for travel.
How much weight can the JAMYOK mount carry?
JAMYOK does not publish a load limit.
