As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

iTODOS IT0160-AB Adjustable Baby Monitor Floor Stand Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The iTODOS IT0160-AB is a floor stand for a baby monitor camera, not a monitor: it holds your existing camera on a pole beside the crib so nothing clamps to the crib rails. Height is set by how many metal tube sections you stack, from 37.4 to 68.8 inches, and a bendable gooseneck at the top aims the camera. iTODOS says the tube, gooseneck and base are all metal, with an anti-slip pad under the base, and the whole stand weighs about 4.6 pounds. It fits cameras with a standard 1/4-inch thread plus a long list of named models, including HelloBaby HB6550/6560, Infant Optics DXR-8 and DXR-8 Pro, Nanit Pro and Flex Stand, Momcozy BM01/BM03, many VTech VM units, Motorola VM75/VM50G/VM44, Owlet, eufy, Babysense and VAVA. This review draws on the iTODOS listing, not hands-on use.

What stands out

  • 37.4 to 68.8 inch height
  • All-metal tube and gooseneck
  • Anti-slip weighted base
  • 1/4-inch thread plus named fits
  • Cable ties included
  • White finish

Who it fits

Good fit for

Parents who want the camera above the crib without fixing anything to the crib or the wall.

Who should skip it

Small nurseries with no floor space beside the crib, or anyone who prefers a wall mount.

Verdict: A tall, all-metal stand with one of the longest compatibility lists we have seen; keep the base clear of foot traffic.

iTODOS IT0160-AB at a glance

37.4-68.8 in height

Set by the number of tube sections.

Metal base, tube and gooseneck

No plastic in the load path, per iTODOS.

1/4-inch thread

Fits most baby cameras.

4.56 lb

Heavier than clamp mounts, steadier on the floor.

Cable ties included

Tidy the camera cord down the pole.

Sections, base and gooseneck

The IT0160-AB builds up from a round metal base with a non-slip pad, then a stack of metal tubes, then a flexible gooseneck that ends in the camera thread. Because height comes from adding or removing sections, adjustment is coarse: you pick the nearest section count, then fine-tune the angle with the gooseneck.

Setting up the iTODOS stand

Stand it beside the crib at the height that gives a top-down view, bend the gooseneck towards the mattress and run the camera cable down the pole with the included ties. Choose the iTODOS IT0160-AB for its metal build and broad VTech and Motorola fit list; choose the AOZTSUN floor stand if you want a slightly lighter aluminium stand that tops out at 67 inches.

Before buying the iTODOS IT0160-AB

Measure first.

Check before you buy

  • Floor space beside the crib for the iTODOS base
  • Your camera is on the iTODOS list or has a 1/4-inch thread
  • A camera cord long enough for a 68.8-inch iTODOS pole
  • No camera ships with the iTODOS stand

The product at a glance

iTODOS Baby Monitor Floor Stand

Best for: Crib-free mounting

Use
Baby
Color
White
Dimensions
11.6 × 7.7 × 68.8 inches
Weight
4.56 pounds

View on Amazon: iTODOS Baby Monitor Floor Stand Affiliate link

All-metal baby monitor floor stand, 37.4-68.8 inches tall, with a gooseneck top, 1/4-inch thread, anti-slip base and cable ties; fits HelloBaby, Infant Optics, Nanit, Momcozy, VTech, Motorola and more.

Pros

  • All-metal build
  • Tall 68.8-inch reach
  • Long compatibility list

Cons

  • Needs floor space
  • Coarse height steps
  • Camera not included

Good fit if

  • You want the camera off the crib entirely

Skip if

  • Your nursery has no room beside the crib

Verdict: Metal floor stand

Specifications side by side

Spec iTODOS Baby Monitor Floor Stand
Use Baby
Color White
Dimensions 11.6 × 7.7 × 68.8 inches
Weight 4.56 pounds
Size Baby Monitor Stand
Model IT0160-AB

Frequently asked questions

How tall is the iTODOS IT0160-AB floor stand?

It adjusts from 37.4 to 68.8 inches by adding or removing tube sections.

Does the iTODOS floor stand fit the Nanit Pro?

Yes. iTODOS lists Nanit Pro and Flex Stand among the compatible cameras.

What is the iTODOS IT0160-AB made of?

iTODOS says the base, tubes and gooseneck are metal.

Does the iTODOS stand include a camera?

No. It is a stand only.

Why use a floor stand instead of a crib mount?

The stand sits on the floor, away from the crib, so a baby cannot reach or pull on it.

See also