Fosmon WaveLink 51054HOM Add-On Motion Sensor Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Fosmon WaveLink 51054HOM is a single add-on motion sensor, sold without a receiver: it only makes sense if you already own a WaveLink chime, such as the 51005HOM driveway kit. Fosmon says it pairs with every WaveLink receiver, and each receiver takes up to 10 transmitters, so this is the way to cover a second door, hallway or garage entrance. The PIR sensor detects movement over about 16 ft, flashes a built-in LED when triggered, and mounts with two screws on a ball socket you can angle. The listing gives no weather rating and no battery details, so treat it as an indoor or sheltered sensor. This review reflects Fosmon's listing; we have not used the sensor.
What stands out
- Add-on transmitter, no receiver
- Works with all WaveLink receivers
- Ten transmitters per WaveLink receiver
- About 16 ft PIR detection
- LED flash on trigger
- No weather rating or battery spec listed
Who it fits
Good fit for
Owners of a Fosmon WaveLink chime who want another entry, hallway or garage door covered on the same receiver.
Who should skip it
Anyone without a WaveLink receiver, or anyone who needs an outdoor-rated sensor for an open driveway.
Verdict: A cheap, simple way to grow a WaveLink setup indoors; not a standalone alarm and not listed for open weather.
Fosmon 51054HOM specs explained
Transmitter only
Needs an existing Fosmon WaveLink receiver to sound a chime.
About 16 ft detection
Suited to doorways, halls and garage doors rather than long drives.
10 per receiver
A single WaveLink receiver pairs up to 10 transmitters.
LED indicator
Flashes on trigger, helpful with the receiver for hard-of-hearing users.
Ball-socket mount
Two screws; hardware included.
3.4 x 2.2 x 1.4 in, 1.9 oz
Small enough for a door frame.
Small white PIR box
At 3.4 x 2.2 x 1.4 inches and 1.9 ounces it sits neatly on a door frame or garage wall. The ball socket lets you tilt it toward the path people walk. Fosmon lists the screws and hardware as included; it does not list a weather rating, so mount it under cover.
Adding it to a WaveLink chime
Pair it with your receiver and give it its own tune so you can tell which door tripped. Choose this add-on if you already own a WaveLink receiver and need one more zone; choose the Fosmon WaveLink 51005HOM kit if you are starting fresh and need a receiver too.
Before buying the 51054HOM
Check these points.
Check before you buy
- You own a Fosmon WaveLink receiver to pair the 51054HOM with
- Your receiver has fewer than 10 transmitters already
- The 51054HOM spot is indoors or sheltered from rain
- About 16 ft of detection covers the 51054HOM doorway or hall
The product at a glance
Fosmon WaveLink Add-On Motion Sensor
Best for: Expanding a WaveLink chime
- Detection Range
- over 16ft / 5m
- Detection Technology
- PIR
- Connectivity
- Wireless
- Use
- Driveway
- Color
- White
- Dimensions
- 3.39 × 2.17 × 1.42 inches
View on Amazon: Fosmon WaveLink Add-On Motion Sensor Affiliate link
Single PIR add-on transmitter for Fosmon WaveLink receivers: about 16 ft detection, LED indicator, ball-socket mount with hardware, pairs up to 10 per receiver. No receiver, weather rating or battery spec in the listing.
Pros
- Low cost per extra zone
- Fits every WaveLink receiver
- Adjustable ball-socket mount
Cons
- No receiver included
- No weather rating listed
Good fit if
- You own a WaveLink chime and want the 51054HOM on another door
Skip if
- You need an outdoor driveway sensor
Verdict: A tidy add-on for indoor WaveLink zones.
Specifications side by side
| Spec | Fosmon WaveLink Add-On Motion Sensor |
|---|---|
| Detection Range | over 16ft / 5m |
| Detection Technology | PIR |
| Connectivity | Wireless |
| Use | Driveway |
| Color | White |
| Dimensions | 3.39 × 2.17 × 1.42 inches |
| Weight | 1.9 ounces |
| Size | 3.39x2.17x1.42in |
| Model | 51054HOM |
Frequently asked questions
Does the Fosmon 51054HOM include a receiver?
No. It is a single add-on transmitter for an existing WaveLink receiver.
Which receivers work with the 51054HOM?
Fosmon says every WaveLink receiver model works with it, and lists models from 51004HOM to 51055HOMEU.
How far does the 51054HOM detect motion?
Over about 16 ft (5 m), sized for hallways, rooms and garage doors.
Can the 51054HOM go outside?
The listing gives no weather rating, so keep it indoors or under a sheltered overhang.
How many 51054HOM sensors can one receiver handle?
Up to 10 transmitters per WaveLink receiver.
See also
- arlo pro 5s 2 camera renewed white review
- arlo pro 6th gen 3 camera 6 month plan review
- reolink trackmix solar dual lens white review
- best security cameras under 30
- best security cameras under 50
- 12 Best Security Cameras Under $100, Compared
- Best Security Cameras Under $150 in 2026: 12 Picks Ranked by Specs
- Best Security Cameras Under $200: 13 Spec-Based Picks
- hendun add on motion sensor review
- aeotec smartthings motion sensor review
