EYSAFT H06 Adjustable Baby Monitor Floor Stand Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The EYSAFT H06 is an accessory, not a camera: a floor stand that holds a baby monitor camera above the crib without drilling or sticking anything to the wall. Height adjusts from 37.5 to 68.8 inches, and the metal top arm bends to aim the camera. The base is large, flat, carbon steel with a non-slip backing, and the whole stand weighs about 5.1 pounds. EYSAFT lists fits for Nanit Pro and Flex Stand, Infant Optics DXR-8 Pro, many VTech models (VM901, VM924, VM923, VM819, Smart HD Plus and others), Momcozy BM01/BM03, VAVA, HelloBaby and Motorola VM75/VM50G/VM44, plus any camera with a threaded hole or a base wider than 2.3 inches. The safety point is the main reason to buy one: it keeps the camera and its cord out of the baby's reach. No camera is included. We wrote this from the listing, not from using it.
What stands out
- 37.5 to 68.8 inch height
- Bendable metal arm
- Weighted, non-slip steel base
- No drilling
- Wide camera compatibility
- Keeps cords out of reach
Who it fits
Good fit for
Renters and parents who cannot or will not drill, and who want an overhead camera angle away from the crib.
Who should skip it
Small nurseries with no floor space beside the crib, or cameras with neither a thread nor a 2.3-inch base.
Verdict: A practical no-drill way to get an overhead view; check your camera is on the fit list.
EYSAFT H06 specs explained
Height 37.5-68.8 in
Tall enough for a top-down crib view.
Bendable metal arm
Fine-tune the angle after setup.
Carbon-steel base, non-slip
Stays put on the floor; about 5.1 lb in total.
Threaded or 2.3-in+ base
Covers most popular cameras.
Camera not included
Stand only.
Build
Metal throughout: a steel pole, metal arm and a wide flat steel base with a non-slip pad underneath. It assembles quickly and stands beside the crib rather than attaching to it, so the camera and cable stay outside the baby's reach.
Setting it up
Assemble the pole, set the height, mount the camera on the arm and bend it toward the mattress. Route the cord down the pole to the outlet. Choose the EYSAFT H06 for Nanit, VTech, Momcozy, HelloBaby or Motorola cameras; choose the Derebir DE-H06-09 floor stand if your camera is an ARENTI, which that stand names.
Before buying the EYSAFT H06
Check these.
Check before you buy
- That your camera is on the EYSAFT H06 fit list or has a thread or 2.3-inch base
- Floor space for the H06 base next to the crib
- That the H06 stand stays far enough from the crib to keep cords out of reach
The product at a glance
EYSAFT Adjustable Baby Monitor Floor Stand
Best for: Renters and no-drill nurseries
- Use
- Baby
- Weight
- 5.11 pounds
View on Amazon: EYSAFT Adjustable Baby Monitor Floor Stand Affiliate link
Floor stand for baby monitor cameras: height 37.5-68.8 inches, bendable metal arm, flat steel non-slip base, fits Nanit, VTech, Momcozy, HelloBaby, Motorola and threaded cameras. Camera not included.
Pros
- No drilling
- Wide height range
- Keeps camera and cord away from the crib
Cons
- Needs floor space
- Camera not included
- About 5 lb to move
Good fit if
- You want an overhead view without drilling
Skip if
- Your camera has no thread and a small base
Verdict: A sturdy no-drill camera stand.
Specifications side by side
| Spec | EYSAFT Adjustable Baby Monitor Floor Stand |
|---|---|
| Use | Baby |
| Weight | 5.11 pounds |
| Color | 68.8"White |
| Model | H06 |
If you are also weighing desk accessories for a home office setup, our opnice 2 tier monitor stand riser with drawer review covers that product's published specifications.
Frequently asked questions
Does the EYSAFT H06 include a camera?
No, it is a stand only.
How tall is the EYSAFT H06?
Adjustable from 37.5 to 68.8 inches.
Does the H06 fit the Nanit Pro?
Yes, EYSAFT lists Nanit Pro and Flex Stand among the fits.
Do I need to drill to use the EYSAFT stand?
No, it stands on the floor.
What is the EYSAFT H06 made of?
Metal, with a carbon-steel base and a non-slip backing.
