As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

DSC LE4000E-AT LTE Alarm Communicator 2-Pack Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The DSC LE4000E-AT is a professional part, sold here as a pack of two: a universal LTE communicator that sends an alarm panel's events over AT&T's cellular network to a monitoring station. It is aimed at installers and monitoring companies rather than DIY homeowners, since it reports to Sur-Gard System I-IP, II, III, IV and 5 receivers. Because it works with any control panel that talks Contact ID or SIA, it is not tied to DSC panels. It offers full event reporting, two on-board inputs and two open-collector outputs, and SMS commands to arm or disarm the panel. If LTE is not available, the listing says it falls back to 3G (HSPA/HSPA+); many carriers have retired 3G, so treat LTE coverage as the real requirement. The listing gives no details on activation or service plans. Written from DSC's listing, not a hands-on test.

What stands out

  • Pack of 2 communicators
  • LTE on AT&T
  • Contact ID and SIA panels
  • Sur-Gard receiver reporting
  • 2 inputs, 2 open-collector outputs
  • SMS arm/disarm

Who it fits

Good fit for

Alarm installers and monitored-alarm users who need a cellular path from a Contact ID or SIA panel to a Sur-Gard receiver.

Who should skip it

DIY users without a monitoring contract, or anyone outside AT&T LTE coverage.

Verdict: A pro-grade cellular communicator; only worth it with a monitoring service behind it.

DSC LE4000E-AT specs explained

LTE, AT&T

Cellular path for alarm signals on AT&T.

3G (HSPA/HSPA+) fallback

Listed, but only useful where 3G service still runs.

Contact ID and SIA

Works with most panels that use these formats.

Sur-Gard I-IP/II/III/IV/5

The monitoring receivers it reports to.

2 inputs, 2 outputs

Extra zones or triggers wired to the communicator.

SMS command and control

Arm and disarm the panel by text message.

Hardware

The pack holds two communicators; the listed size of about 8.5 x 4.9 x 1.3 inches and 1.5 pounds covers the package. Each unit wires to the panel's communication path and needs a spot with good LTE reception.

Where it fits

An installer registers the LE4000E-AT with the monitoring account and sets which events report; after that, the panel's alarms reach the station over LTE. The SMS commands help for remote arming. Choose the LE4000E-AT for professional monitoring over cellular; choose the EYEZON Sidekick LTE if you run an EnvisaLink 4 and only want a DIY backup path.

Before buying the DSC LE4000E-AT

Check these points first.

Check before you buy

  • That your monitoring station uses a Sur-Gard receiver the LE4000E-AT supports
  • That your panel reports in Contact ID or SIA
  • AT&T LTE coverage where the LE4000E-AT will mount
  • Activation and service costs for the LE4000E-AT with your provider

The product at a glance

DSC LTE Wireless Alarm Communicator 2-Pack

Best for: Alarm installers

Connectivity
LTE, 3G
Dimensions
1.3 × 4.9 × 8.5 inches
Weight
1.5 pounds

View on Amazon: DSC LTE Wireless Alarm Communicator 2-Pack Affiliate link

Two universal LTE alarm communicators for AT&T with 3G (HSPA) fallback listed, Contact ID and SIA panel support, full event reporting, 2 inputs, 2 open-collector outputs, SMS arm/disarm, Sur-Gard receiver compatibility.

Pros

  • Works with most Contact ID/SIA panels
  • Inputs and outputs on board
  • Two units in the pack

Cons

  • Needs a monitoring service
  • AT&T only
  • 3G fallback of limited use

Good fit if

  • You run monitored alarms on Contact ID or SIA panels

Skip if

  • You want a DIY alert path without monitoring

Verdict: Pro cellular reporting, monitoring required.

Specifications side by side

Spec DSC LTE Wireless Alarm Communicator 2-Pack
Connectivity LTE, 3G
Dimensions 1.3 × 4.9 × 8.5 inches
Weight 1.5 pounds
Model LE4000E-AT

Frequently asked questions

Which carrier does the DSC LE4000E-AT use?

AT&T, per the listing.

Does the LE4000E-AT only work with DSC panels?

No. It works with panels that communicate in Contact ID or SIA.

Where does the LE4000E-AT send alarm signals?

To Sur-Gard System I-IP, II, III, IV and 5 monitoring receivers.

Can I arm my alarm by text with the LE4000E-AT?

The listing lists SMS command and control for arming and disarming.

How many LE4000E-AT units are in this listing?

A pack of two.

See also