As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

AnKeKe 20-Inch Flexible Twist Baby Monitor Mount Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The AnKeKe Flexible Twist mount (model Stand01) is an accessory, not a monitor: it holds a baby camera that has a standard 1/4-inch threaded socket on its base. The arm is 20 inches long, has an aluminium core under a smooth rubber skin, and you bend and wrap it around a cot rail, shelf or piece of furniture instead of drilling the wall. The head rotates through 360 degrees so you can aim the camera down at the mattress. AnKeKe says it fits most baby monitors and also action cameras or small video lights with the same thread, but it does not publish a weight limit, so heavier pan-tilt cameras are a judgement call. Check your camera's base for a 1/4-inch hole before buying. This review is based on the product listing; we have not handled the mount.

What stands out

  • Accessory: camera not included
  • 20-inch bendable arm
  • 1/4-inch screw for most baby cameras
  • 360-degree head rotation
  • Wraps around rails or shelves, no drilling
  • Rubber-coated aluminium core

Who it fits

Good fit for

Parents whose baby camera has a 1/4-inch thread and who want an overhead view without screwing a bracket into the wall, including renters.

Who should skip it

Anyone whose camera mounts with a proprietary clip or magnet, or who wants a rigid floor stand that keeps the camera fully clear of the cot.

Verdict: A low-cost, renter-friendly way to get a top-down view, as long as your camera has the standard thread and is light enough for a bendable arm.

AnKeKe Stand01 mount details

20-inch arm

Long enough to reach over a cot rail or shelf edge and point down.

1/4-inch thread

The standard camera screw; check that your baby camera has a matching socket.

360-degree rotation

Lets you turn and tilt the camera to the angle you want.

Aluminium core, rubber skin

Holds its shape once bent; smooth surface with no sharp edges.

No-drill fitting

Twists around furniture instead of fixing to a wall.

Weight limit

Not listed; AnKeKe only says it supports a large weight.

A twist arm instead of a wall bracket

The arm is a single bendable rod with a screw at one end. You coil the free end around a support and bend the rest into position, and it can be taken apart and folded for travel. Because it grips by friction rather than screws, give it a firm wrap and check it does not sag after the camera goes on.

Fitting it safely around a cot

For a cot-side view, wrap the arm around a rail or a nearby shelf so the camera looks straight down. Keep the camera's power cable routed away from the cot so the baby cannot reach it, and check the grip regularly. Choose this AnKeKe arm if your camera has a 1/4-inch socket and you cannot drill; choose a floor stand or wall bracket if your camera is heavy or you want nothing attached to the cot.

Before buying the AnKeKe Stand01 arm

Confirm these.

Check before you buy

  • Your camera has a 1/4-inch threaded socket for the Stand01 screw
  • Your camera is light enough for a bendable 20-inch arm
  • A rail or shelf the AnKeKe arm can wrap around firmly
  • A route for the camera cable that keeps it out of the baby's reach

The product at a glance

AnKeKe 20in Flexible Twist Baby Monitor Mount

Best for: Overhead cot view

Use
Baby
Color
White
Dimensions
20 × 0.2 × 0.2 inches

View on Amazon: AnKeKe 20in Flexible Twist Baby Monitor Mount Affiliate link

Accessory mount for baby cameras with a 1/4-inch thread: 20-inch bendable arm with an aluminium core and rubber coating, 360-degree adjustment, wraps around cot rails, shelves or furniture without drilling, folds for travel. No weight limit listed.

Pros

  • No drilling needed
  • Fits standard 1/4-inch thread
  • Low price

Cons

  • No weight limit published
  • Not for clip or magnet camera bases

Good fit if

  • Your baby camera has a 1/4-inch socket and you rent

Skip if

  • Your camera uses a proprietary mount

Verdict: A simple no-drill mount for light baby cameras.

Specifications side by side

Spec AnKeKe 20in Flexible Twist Baby Monitor Mount
Use Baby
Color White
Dimensions 20 × 0.2 × 0.2 inches
Size 20in
Model Stand01

Frequently asked questions

Does the AnKeKe Stand01 come with a camera?

No. It is a mount only; you supply the baby camera.

Which cameras fit the AnKeKe twist mount?

Any camera with a 1/4-inch threaded hole on the base, which covers many baby monitors, action cameras and small video lights.

Does the AnKeKe Stand01 need drilling?

No. You twist the arm around a cot rail, shelf or furniture.

How much weight can the AnKeKe arm hold?

AnKeKe does not publish a figure; it describes an aluminium core that supports a large weight.

Can the AnKeKe mount be adjusted after fitting?

Yes. The arm bends and the head rotates 360 degrees for tilt and swivel.

See also