1byone 0499 Two-Sensor Wireless Driveway Alarm Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The 1byone 0499 kit gives you two waterproof PIR sensors and one plug-in receiver, so you can cover a driveway and a back gate from the start. Each sensor detects heat and movement out to about 24 ft from its angled eye and reaches the receiver at up to 1000 ft. The receiver offers 36 chimes and three volume levels from 25 to 80 dB, and you choose sound, LED flash or both, which is handy at night or in a loud room. A receiver pairs with up to 5 sensors, and sensors mount to walls, fence posts or trees with the included plugs and screws. The listing does not name the battery type for the sensors or give an IP rating, only "waterproof". It also carries a 24-month support window. Our notes come from the listing; we did not test the kit.
What stands out
- Two PIR sensors included
- 24 ft detection, 1000 ft link
- 36 chimes, 25-80 dB
- Sound, LED or both
- Up to 5 sensors per receiver
Who it fits
Good fit for
Homes with two entry points, such as a driveway and a side gate, on a budget.
Who should skip it
Very long properties beyond 1000 ft, or buyers who want an alarm mode rather than a doorbell-style chime.
Verdict: Good value for two sensors; the 80 dB top volume is chime-level, not a siren.
1byone 0499 specs in plain terms
2 PIR sensors
Two zones covered out of the box.
24 ft detection
Reach from each sensor's angled eye.
1000 ft link
Per sensor, to the receiver.
36 chimes, 25-80 dB
Three volume steps.
Sound / LED / both
Pick the alert style.
Expand to 5 sensors
Per receiver.
Size and mounting
The listing gives a package size of about 4.7 x 4.7 x 4 inches. The box holds 2 PIR sensors, a doorbell-style receiver, 2 wall plugs, 2 screws and a manual. Sensors can go on a wall, fence post or tree; the receiver plugs in indoors.
Two zones at once
Mount one sensor at the driveway entrance and one at a gate or porch, give each a different chime, and you will know which spot was crossed. Use the LED-only mode at night if a chime would wake the house. Choose the 1byone 0499 for two sensors at the lowest cost; choose the 1byone 0514 if you want the receiver to switch into an alarm mode as well as a chime.
Before buying the 1byone 0499
Check these points.
Check before you buy
- Batteries for the two 1byone 0499 sensors (type not listed)
- That 80 dB from the 0499 receiver is loud enough for your home
- A spot within 1000 ft of each 1byone sensor for the receiver
The product at a glance
1byone Dual-Sensor Wireless Driveway Alarm
Best for: Driveway plus a side gate
- Wireless Range
- 1000ft/300m
- Detection Range
- 24ft/8m
- Detection Technology
- Passive Infrared (PIR)
- Receiver Power Source
- Plug-in
- Alert Modes
- Sound, LED Flash, Sound and LED Flash
- Chime Count
- 36
View on Amazon: 1byone Dual-Sensor Wireless Driveway Alarm Affiliate link
Two waterproof PIR sensors and one plug-in receiver: 24 ft detection, 1000 ft link, 36 chimes, 25-80 dB, sound/LED/both alerts, expandable to 5 sensors.
Pros
- Two sensors included
- LED-only option
- Mounts on posts or trees
Cons
- Top volume is 80 dB
- Battery type not stated
- No IP rating listed
Good fit if
- You want two zones covered for little money
Skip if
- You need a siren-level alarm
Verdict: Two sensors, one chime, low cost.
Specifications side by side
| Spec | 1byone Dual-Sensor Wireless Driveway Alarm |
|---|---|
| Wireless Range | 1000ft/300m |
| Detection Range | 24ft/8m |
| Detection Technology | Passive Infrared (PIR) |
| Receiver Power Source | Plug-in |
| Alert Modes | Sound, LED Flash, Sound and LED Flash |
| Chime Count | 36 |
| Weather Resistance | Weatherproof |
| Connectivity | Wireless |
| Power Source | Plug-in |
| Features | Motion Detection, Weatherproof, PIR Sensor |
| Use | Driveway |
| Color | White |
| Dimensions | 4.7 × 4 × 4.7 inches |
| Size | one receiver two sensors |
| Model | 6-O00QH-0499 |
Frequently asked questions
How many sensors come with the 1byone 0499?
Two PIR sensors and one receiver.
How far do the 1byone 0499 sensors detect?
About 24 ft from each sensor.
How loud is the 1byone 0499 receiver?
Three volume levels from 25 to 80 dB.
Can the 1byone 0499 flash instead of chime?
Yes, choose sound, LED flash or both.
How many sensors can one 1byone 0499 receiver take?
Up to 5 sensors.
